Boost your WiFi signal: It is annoying when your WiFi doesn’t work right, and movies or websites take a long time to load. Getting better WiFi doesn’t have to be hard. This list has ten simple things you can do to boost your WiFi. It will work better and go faster if you follow these tips.
Optimize Your Router Placement to Boost Your WiFi Signal
If you want a good WiFi connection at home, where you put your router is very important. This could happen sometimes if your machine is in a corner. It should be in the middle of your home.
Please do not put down the computer. Being high lets signs reach more people. Make sure that the signal isn’t blocked by too many walls or things in the way to get a better link. When the computer is behind thick walls, you know the signal is weak.
Do not put it near water or metal things. The WiFi frequencies will be slowed down because metals and water soak them up. Fridges, fish tanks, and other things should not be close to routers. It works better if you put the router against a wall, away from other electronics.
You might want to visit other places. Moving the router around might help get the WiFi to work better. The signs can change a lot if you move around a bit. If you move your computer, Wi-Fi will work better and be stronger.
Adjust Antennas For Better Coverage
They’re not just on your router to look nice. It’s spread all over your house by them. They can really help to make your signal stronger if you set them up right.
Put the antennas up and down in a straight line. This makes the WiFi work in more parts of the room. If your house is spread out, routers work better in different rooms.
You should put up two antennas, one upright and one horizontal, to get better coverage. When devices have two transmitters, they can connect better both up and down and left to right, which increases range. To find the best setting, tilt and turn the antennas in different ways.
If you have to, switch out your regular receivers for ones that are stronger. It is possible to direct the WiFi signal to certain places and make it go farther with high-gain devices. It should help in places where the signal wasn’t very strong.
Test and try again every day to make changes. If you know where and how to turn a sign, you know that it can be strong or weak. You can check your internet speed with a speed app or by seeing if pages load faster.
Update Your Router Firmware
The code that runs your router and makes sure it works right is called firmware. A lot of people forget about it. Updating the program makes it faster, which is good for your WiFi link.
In the paper that came with your router, you can find out how to change the software. Most routers today make it easy to update. The router’s settings screen might have a button that says “Update.” Log in and look for it.
They make things safer and fix bugs. After changes are made things work better without much trouble. Updates are often sent out by companies to fix bugs and speed things up for users. Your router might not work as well as it should if you don’t keep it up to date.
Make a copy of your settings before you make any changes, because updates can sometimes delete your settings. In that way, you won’t lose your choices or passwords. Also, don’t use the internet during the changes. If you want to fully restart the computer, don’t connect anything to it.
Use A Wifi Extender Or Booster
You can make the area where your WiFi works bigger with extenders and boosters. When some parts of your house don’t get much service, these tools come in very handy. For the most part, they give out a second WiFi signal that can reach further.
- Between the router and the weak spot, put the extension in the middle.
- So the device can work well, choose a spot where nothing else will be going on.
- It will work better if you plug it in and hold it three feet above the ground.
- You can find a lot of cheap and simple extenders on the market.
- Extenders improve the signal without slowing it down as long as they are put in the right place.
Boosters don’t just repeat weak ideas; they make them powerful. This choice could be better if walls and other things make it hard to use WiFi. Make sure you’re in the right place no matter what. Remember that dead zones are gone when you boost quickly.
Switch To A Less Crowded Channel
When your computer sends out WiFi, it does so on certain bands. The channels can be used at the same time by many computers in the same area. Your link moves more slowly because of this impact.
The usual routes on routers get busy, which makes information move more slowly. In fact, moving to different outlets makes signals louder and less crowded. You can choose which channel to use on your router’s settings page.
Find channels that aren’t too busy close with apps that scan WiFi. Make yours look like mine. This makes things go the fastest and stops other systems from getting in the way.
Pick channels 1, 6, or 11 in the 2.4 GHz band because they don’t meet very often. In the 5 GHz band, where there are more unique channels, this problem doesn’t happen as often.
Here is a good place to try new things. Start with one channel and check to see if the speed stays the same or if the delay gets smaller. Do this over and over until you find the best station.
Check For Interference From Other Devices
A lot of things in the house mess up WiFi connections by accident. These things either get in the way of the wireless signal or stop it, which makes it less strong.
A lot of the time, microwaves mess up the 2.4 GHz bands. The messages aren’t as strong if the router shares bands with ovens. Child cameras and landline phones share the same WiFi bands, which you already know.
Do not put these things near your computer or other gadgets that are linked to it. You should keep Bluetooth headsets away from routers because the signals can mix and make things not work right. Often, noise is worse when electronic gadgets are close to each other.
These things won’t bother you as much on the 5 GHz band. Plus, some newer routers have two bands. Turn on dual-band to cut down on problems caused by sources that cross.
Read Also: 7 Best Features of iOS 26 That You Will Really Want to Use
Invest In A Modern Router
Old routers make WiFi move much more slowly. A new router makes a big difference in the quality because tech changes so fast. The radios and computers in newer types are better and faster, so they can easily handle high speeds.
Routers today have two or three bands, which lets your devices connect to them in more ways. Smart gadgets need more internet these days, and only the newest routers can handle a lot of links at once.
You should look for systems that use MU-MIMO. With its direct link to devices, it makes sharing easy, which is something that older models can’t do well. The networks work faster when more people use them at the same time.
Also, new routers have better security. Buying certified products is a good idea. It’s not worth it to spend money on names you don’t know much about, so read reviews. Usually, it takes less time to buy new routers than to fix old ones.
